8237-1604集成超速保护安全PLC
8237-1604集成超速保护安全PLC
ProTechTPS是一款集成超速保护的安全PLC,可在检测到安全事件时安全关闭任何工厂工艺设备、发动机、蒸汽、天然气或水轮机。可提供两个双冗余跳闸继电器输出,使用2-out- 3投票架构,或三个独立的非投票跳闸继电器输出。可编程输入和输出,4-20 mA速度读出和Modbus®通信使这种安全PLC易于集成到任何工厂安全系统中或作为独立的。该ProTech TPS型号是一种舱壁安装,高压/低压电源输入,投票继电器/投票输入总保护系统。
每个ProTechTPS模块可以从模块的前面板、Modbus通信端口手动测试,也可以通过其自动测试例程功能自动测试。ProTechTPS允许用户配置超速或自定义编程的测试,以便定期手动或自动执行。有了这些测试例程,每个模块(A、B、C)一次测试一个,要么记录成功的测试结果,要么在检测到故障时停止例程,并指示/报警检测到的故障。
8237-1604集成超速保护安全PLC
Each ProTechTPS module can be tested manually from the module’s front panel, Modbus communications port, or automatically via its auto-test routine function. The ProTechTPS allows users to configure overspeed or custom-programmed tests to be performed manually or automatically on a periodic basis. With these test routines, each module (A, B, C) is tested one at a time, and either a successful test result is logged or, upon sensing a fault, the routine is halted and the sensed fault indicated/alarmed.
ProTechTPS的三重模块化设计允许用户轻松更换其模块(A, B, C),同时被监测的设备/涡轮机在线并正常运行。该装置的背板即插即用结构以及模块对模块的学习功能增强了更换的便利性。
The ProTechTPS’s triple modular design allows users to easily replace one of its modules (A, B, C) while the monitored equipment/turbine is on-line and operating normally. Ease of replacement is enhanced by the unit’s backplane plug-and-operate structure, and its module-to-module learning function.
ProTechTPS日志功能记录(保存到内存中)所有跳闸、告警、跳闸阀响应时间和超速事件。行程日志功能使用滚动缓冲区,并记录近50次感测的行程或报警事件和近20次超速事件到内存,并伴有相关时间。每个日志文件都可以从设备的前面板查看,或者通过ProTechTPS服务工具程序下载到计算机上。每个模块使用非易失性存储器来确保所有记录的事件都被保存,即使在断电时也是如此。
The ProTechTPS log function logs (saves to memory) all trips, alarms, trip valve response times, and overspeed events. The trip log function uses a scrolling buffer and records the last 50 sensed trip or alarm events and the last 20 overspeed events to memory, with associated times. Each log file can be viewed from the unit’s front panel, or downloaded to a computer via the ProTechTPS service tool program. Each module utilizes nonvolatile memory to ensure that all logged events are saved, even on loss of power.
PM851AK01 | 3BSE066485R1 |
PM856AK01 | 3BSE066490R1 |
PM858K01 | 3BSE082895R1 |
PM858K02 | 3BSE082896R1 |
PM860AKO1 | 3BSE066495R1 |
PM862K01 | 3BSE076940R1 |
PM862K02 | 3BSE081636R1 |
PM866AK01 | 3BSE076939R1 |
PM866AK02 | 3BSE081637R1 |
PM891K01 | 3BSE053241R1 |
PM891K02 | 3BSE053242R1 |
SB822 | 3BSE018172R1 |
PM857K01 | 3BSE088385R1 |
PM857K02 | 3BSE088386R1 |
PM863K01 | 3BSE088381R1 |
PM863K02 | 3BSE088382R1 |
PM867K01 | 3BSE076355R1 |
PM867K02 | 3BSE081638R1 |
SM811K01 | 3BSE018173R1 |
SM812K01 | 3BSE072270R1 |
I/O模块的挑选
(1)数字量输入输出模块的挑选
数字量输入输出模块的挑选应考虑使用要求。例如对输入模块,应考虑输入信号的电平、传输距离等使用要求。常选继电器系列,或普通模块,外配继电器隔离。
输入输出模块依照输入输出点数又能够分为:8点、16点、32点等标准,挑选时也要依据实际的需要合理配备
(2)模拟量输入输出模块的挑选
模拟量输入模块,依照模拟量的输入信号类型能够分为:电流输入型、电压输入型、热电偶输入型等。电流输入型一般的信号等级为4~20mA或0~20mA;电压型输入模块一般信号等级为0~10V、-5V~+5V等。有些模拟量输入模块能够兼容电压或电流输入信号。
模拟量输出模块相同分电压型输出模块和电流型输出模块,电流输出的信号一般有0~20mA、4~20mA。电压型输出信号一般有0~5V、-10V~+10V等。
模拟量输入输出模块,依照输入输出通道数能够选为8通道、16通道